Current total list of publications (until 04.2024)

[220] Shuho Yamada, Yuki Komatsu, Stefan Bracke, and Masato Inoue:
Derivation of product architecture candidates using a design structure matrix and support method for determining their supply chains.
In: International Journal of Automation Technology, Fuji Technology Press Ltd. (20xx).
- paper submitted -

[219] Masato Inoue and Stefan Bracke:
A Strategy for Design of Product Architecture Considering Supply Chain.
In: Proceedings of Electronics Goes Green 2024 Conference; June 18 – 20, 2024, Berlin, Germany.
- paper accepted -

[218] Philipp Heß, Marcel Schmidt, Niclas Albrecht, Sebastian Duy and Stefan Bracke:
Testing dental implants: The development of a test rig that enables testing under realistic conditions to ensure the long-term reliability.
In: Proceedings of the 34th European Safety and Reliability Conference (Eds.: XXX), 23rd – 27th June 2024, Cracow, Poland. European Safety and Reliability Association (ESRA).
- paper accepted -

[217] Georgios Ioannou, Olaf Günnewig, Martin Münker and Stefan Bracke:
Analysis of battery cells via computer tomography: Possibilities and technical limits of detectability regarding to function- and safety-critical failures.
In: Proceedings of the 34th European Safety and Reliability Conference (Eds.: XXX), 23rd – 27th June 2024, Cracow, Poland. European Safety and Reliability Association (ESRA).
- paper accepted -

[216] Jannis Pietruschka, Alicia Puls and Stefan Bracke: Alternative approach to modelling complex failure behaviours of technical products: Comparative Study Sb Johnson versus Weibull.
In: Proceedings of the 34th European Safety and Reliability Conference (Eds.: XXX), 23rd – 27th June 2024, Cracow, Poland. European Safety and Reliability Association (ESRA).
- paper accepted -

[215] Berna Ulutas, Georgios Ioannou and Stefan Bracke:
Assessing the effectiveness and efficiency of selected solution approaches for two-dimensional stock cutting problems (Part I): Case Study Printed Circuit Boards.
Manufacturing conference (14. – 16.05.2024); Lecture Notes in Mechanical Engineering, Springer publisher (20XX).
- paper accepted -

[214] Marcin Hinz, Alexander Lindworsky and Stefan Bracke:
Qualification of AI-based surface topography inspection systems for inline measurement in series production: Tactile touch systems versus optical AI analysis.
Manufacturing conference (14. – 16.05.2024); Lecture Notes in Mechanical Engineering, Springer publisher (20XX).
- paper accepted -

[213] Kneifel, Jens; Steinberg, Christian; Böttinger, Christoph; Roj, Robin; Theiß, Ralf; Dültgen, Peter; Bracke, Stefan; Blecher, Jörg; Böhme, Norbert; Klostermann, Christian:
AI-based Wear Analysis of Sawing Processes using Machine Data.
Proceedings Berlin Workshop on Artificial Intelligence for Engineering Applications (2023)
- paper in press -

[212] Jannis Pietruschka, Fabian Hartwig, Philipp Heß und Stefan Bracke:
Prognose der Restlebensdauer zyklisch beanspruchter Linearaktuatoren aus Formgedächtnislegierungen: Ein Ansatz auf Basis von Methoden des maschinellen Lernens.
Bericht zur GQW-Jahrestagung 2023 in Wuppertal, Gesellschaft für Qualitätswissenschaft e.V. Springer publisher (20xx).
- paper in press -

[211] Alexander Popp, Benedikt Schmülling, Lea Hannah Günther und Stefan Bracke:
Fahrzyklen und realitätsnahe Testprofile zur Bestimmung des Gesundheitszustands von Lithium-Ionen Zellen in Elektrofahrzeugen.
Eingereicht beim 15. Wissenschaftsforum Mobilität 2023, Next chapter in Mobility.
- paper in press -

[210] Marcin Hinz, Jannis Pietruschka and Stefan Bracke:
Uncertainty Quantification of Different Data Sources with Regard to a LSTM Analysis of Grinded Surfaces. In: Proceedings of the 33rd European Safety and Reliability Conference (Eds.: Mário P. Brito, Terje Aven, Piero Baraldi, Marco Cepin and Enrico Zio), 3rd – 7th September 2023, Southampton, England. European Safety and Reliability Association (ESRA). Research Publishing Services, Singapore.
Pages: 1869–1876; doi: 10.3850/978-981-18-8071-1_P408-cd

[209] Marcin Hinz, Jannis Pietruschka and Stefan Bracke:
Optical Surface Analysis with Support Vector Machines based on Two Different Measurement Techniques.
In: Proceedings of the 33rd European Safety and Reliability Conference (Eds.: Mário P. Brito, Terje Aven, Piero Baraldi, Marco Cepin and Enrico Zio), 3rd – 7th September 2023, Southampton, England. European Safety and Reliability Association (ESRA). Research Publishing Services, Singapore. .
Pages: 2721–2722; doi: 10.3850/978-981-18-8071-1_P409-cd

[208] Marcin Hinz and Stefan Bracke:
Framework for the Monitoring of Complex Surfaces Based on Optical Assessment.
In: Proceedings of the 33rd European Safety and Reliability Conference (Eds.: Mário P. Brito, Terje Aven, Piero Baraldi, Marco Cepin and Enrico Zio), 3rd – 7th September 2023, Southampton, England. European Safety and Reliability Association (ESRA). Research Publishing Services, Singapore.
Pages: 1729-1736; doi: 10.3850/978-981-18-8071-1_P444-cd

[207] Stefan Bracke and Alicia Puls:
Identification of Risky Parts in a Product Fleet in the Usage Phase Based on Cluster Analysis – Case Study Light Electric Vehicle in the Urban Environment. In: Proceedings of the 33^rd European Safety and Reliability Conference (Eds.: Mário P. Brito, Terje Aven, Piero Baraldi, Marco Cepin and Enrico Zio), 3^rd – 7^th September 2023, Southampton, England. European Safety and Reliability Association (ESRA). Research Publishing Services, Singapore.
Pages 3520–3527; ISBN: 978-981-18-8071-1;
doi: 10.3850/978-981-18-8071-1_P307-cd

[206] Benedict Theren, Philipp Heß, Stefan Bracke, and Bernd Kuhlenkötter:
Influence of the phase transformation behaviour of NiTi shape memory alloy wires on the predictability of strain during operation. Proceedings of the ASME 2022 Conference on Smart Materials, Adaptive Structures and Intelligent Systems – SMASIS2022, September 12 – 14, 2022, Dearborn (MI), USA. V001T02A002. ASME. https://doi.org/10.1115/SMASIS2022-88882

[205] Benedict Theren, Philipp Heß, Stefan Bracke, and Bernd Kuhlenkötter:
The development and verification of a simulation model of shape-memory alloy wires for strain prediction. 2022. Journal Crystals 12, no. 8: 1121. https://doi.org/10.3390/cryst12081121

[204] Stefan Bracke and Alicia Puls:
COVID-19 pandemic: Analyzing spreading behavior of different infection waves within the first two years in Germany by the use of reliability methods.
In: Proceedings Probabilistic Safety Assessment and Management PSAM 16, June 26 – July 1, 2022, Honolulu, Hawaii, USA.
Pages 233–244; ISBN: 9781713863755

[203] Fabian Hartwig, Marcin Hinz, Severin Dahms und Stefan Bracke:
Auslegung eines Accelerated Life Tests zur Abbildung der Langzeit-Zuverlässigkeit von Produkten im Prototypenstadium.
Bericht zur GQW-Jahrestagung 2022 in Cottbus, Gesellschaft für Qualitätswissenschaft e.V. Springer publisher (2023).
https://doi.org/10.1007/978-3-658-40588-5_3

[202] Marcin Hinz, Jannis Pietruschka and Stefan Bracke:
LSTM based Condition Monitoring of Fine Grinded Surfaces.
In: Proceedings of the 32nd European Safety and Reliability Conference (Eds.: Simon Wilson et al.), 28th August – 1st September 2022, Dublin, Ireland. European Safety and Reliability Association (ESRA). Research Publishing, Singapore.
Pages: 2039–2046; doi: 10.3850/978-981-18-5183-4_S05-09-529-cd

[201] Marcin Hinz, Doha Meslem and Stefan Bracke:
The application of k-means algorithm for the unsupervised analysis of surface topographies.
In: Proceedings of the 32nd European Safety and Reliability Conference (Eds.: Simon Wilson et al.), 28th August – 1st September 2022, Dublin, Ireland. European Safety and Reliability Association (ESRA). Research Publishing, Singapore.
Pages: 807–814; doi: 10.3850/978-981-18-5183-4_R16-02-524-cd

[200] Marcin Hinz, Doha Meslem and Stefan Bracke :
Application of the Gaussian Mixture Model algorithm for the unsupervised analysis of surface topographies.
In: Proceedings Probabilistic Safety Assessment and Management PSAM 16, June 26 – July 1, 2022, Honolulu, Hawaii, USA.
Pages 233-244; ISBN: 9781713863755

[199] Dominik Brüggemann, Marcin Hinz and Stefan Bracke:
An application of semi-supervised learning to sparsely labelled data.
In: Proceedings of the 32nd European Safety and Reliability Conference (Eds.: Simon Wilson et al.), 28th August – 1st September 2022, Dublin, Ireland. European Safety and Reliability Association (ESRA). Research Publishing, Singapore.
Pages: 799–806; doi: 10.3850/978-981-18-5183-4_R16-01-516-cd

[198] Dominik Brüggemann, Christoph Rosebrock and Stefan Bracke:
Further analysis of a circular metal sawing process.
In: Proceedings of the 32nd European Safety and Reliability Conference (Eds.: Simon Wilson et al.), 28th August – 1st September 2022, Dublin, Ireland. European Safety and Reliability Association (ESRA). Research Publishing, Singapore.
Pages: 1315–1322; doi: 10.3850/978-981-18-5183-4_R22-15-509-cd

[197] Franz-Georg Neupert and Stefan Bracke:
New two phases distribution failure model for a description of failures caused by a change of material property.
In: Proceedings of the 32nd European Safety and Reliability Conference (Eds.: Simon Wilson et al.), 28th August – 1st September 2022, Dublin, Ireland. European Safety and Reliability Association (ESRA). Research Publishing, Singapore.
Pages: 1633–1638; doi: 10.3850/978-981-18-5183-4_R28-05-358-cd

[196] Alicia Puls and Stefan Bracke:
Comparative study on multivariate trend analysis by the example of traction batteries in the usage phase.
In: Proceedings of the 32nd European Safety and Reliability Conference (Eds.: Simon Wilson et al.), 28th August – 1st September 2022, Dublin, Ireland. European Safety and Reliability Association (ESRA). Research Publishing, Singapore.
Pages: 862–869; doi: 10.3850/978-981-18-5183-4_R16-09-212-cd

[195] Lea Hannah Günther, Pit Fiur and Stefan Bracke:
Usage data analysis of lithium-ion batteries as a base for the prediction of the product reliability in a specific second life application.
In: Proceedings of the 32nd European Safety and Reliability Conference (Eds.: Simon Wilson et al.), 28th August – 1st September 2022, Dublin, Ireland. European Safety and Reliability Association (ESRA). Research Publishing, Singapore.
Pages: 1212–1219; doi: 10.3850/978-981-18-5183-4_R22-02-057-cd

[194] Marcin Hinz, Jannis Pietruschka and Stefan Bracke:
Application of Random Forest Algorithm for the Quality Determination of manufactured Surfaces.
In: Manufacturing conference (16. – 19.05.2022); Lecture Notes in Mechanical Engineering, Springer publisher (2022).
Pages 87–98; ISBN: 978-3-031-00166-6; https://doi.org/10.1007/978-3-031-00218-2_8

[193] Kamil Kowol, Stefan Bracke and Hanno Gottschalk:
A-Eye: Driving with the Eyes of AI for Corner Case Generation.
In: Proceedings of IEEE Intelligent Vehicles Symposium 22 (2022).
Pages: 41–48; doi: 10.5220/0011526500003323

[192] Dominik Brüggemann, Jens Kneifel and Stefan Bracke:
Fundamental analysis of a circular metal sawing process.
In: Manufacturing conference (16. – 19.05.2022); Lecture Notes in Mechanical Engineering, Springer publisher (2022).
Pages: 124–137; doi: 10.1007/978-3-031-00805-4_11

[191] Marcin Hinz, Lea Hannah Günther, Jannis Pietruschka and Stefan Bracke:
Anwendung von Algorithmen des Maschinellen Lernens zur Beurteilung der Qualität von fein geschliffenen Messeroberflächen als Grundlage für die kontinuierliche Prozessverbesserung im Rahmen des Qualitätsmanagements.
Bericht zur GQW-Jahrestagung 2021 in Cottbus, Gesellschaft für Qualitätswissenschaft e.V. Springer publisher (2021).
Seite: 169–187; https://doi.org/10.1007/978-3-658-38686-3_10

[190] Alicia Puls and Stefan Bracke:
COVID-19-Pandemie: Transfer von Methoden der Technischen Zuverlässigkeit zur Analyse von Ausbreitungsverhalten und Eindämmungsmaßnahmen.
GQW-Jahrestagung 2021.
Bericht zur GQW-Jahrestagung 2021 in Cottbus, Gesellschaft für Qualitätswissenschaft e.V. Springer publisher (2021).
Seite: 95–114; https://doi.org/10.1007/978-3-658-38686-3_6

[189] Dominik Brüggemann, Robin Chan, Hanno Gottschalk, and Stefan Bracke:
Software architecture for human-centered reliability assessment for neural networks in autonomous driving.
11th IMA International Conference on Modelling in Industrial Maintenance and Reliability (MIMAR), 2021, doi: 10.19124/ima.2021.01.8

[188] Alicia Puls and Stefan Bracke:
Reliability Methods for analyzing COVID-19 pandemic spreading behavior, lockdown impact and infectiousness.
In: Proceedings of the 31st European Safety and Reliability Conference (Eds.: Bruno Castanier, Marko Cepin, David Bigaud and Christophe Berenguer), 19th – 23rd September 2021, Angers, France. European Safety and Reliability Association (ESRA). Research Publishing Services, Singapore.
Pages: 961–968; ISBN: 978-981-18-2016-8; doi:10.3850/978-981-18-2016-8_394-cd

[187] Stefan Bracke, Alicia Puls and Masato Inoue:
COVID-19 pandemic: Analyzing of spreading behavior, the impact of restrictions and prevention measures in Germany and Japan.
In: Proceedings of the 31st European Safety and Reliability Conference (Eds.: Bruno Castanier, Marko Cepin, David Bigaud and Christophe Berenguer), 19th – 23rd September 2021, Angers, France. European Safety and Reliability Association (ESRA). Research Publishing Services, Singapore.
Pages: 969–976; ISBN: 978-981-18-2016-8; doi:10.3850/978-981-18-2016-8_395-cd

[186] Lea Hannah Günther, Marcin Hinz and Stefan Bracke:
CNN based analysis of grinded surfaces.
In: Proceedings of the 31st European Safety and Reliability Conference (Eds.: Bruno Castanier, Marko Cepin, David Bigaud and Christophe Berenguer), 19th – 23rd September 2021, Angers, France. European Safety and Reliability Association (ESRA). Research Publishing Services, Singapore.
Pages: 1026–1033; ISBN: 978-981-18-2016-8; doi: 10.3850/978-981-18-2016-8_181-cd

[185] Lea Hannah Günther, Tobias Scholz, Friedbert Pautzke, Heiko Fechtner, Benedikt Schmuelling, Nora Schelte, Semih Severengiz, Marcin Hinz and Stefan Bracke:
Reliability engineering of electric vehicle powertrains: Data collection and analysis based on products in the usage phase.
In: Proceedings of the 31st European Safety and Reliability Conference (Eds.: Bruno Castanier, Marko Cepin, David Bigaud and Christophe Berenguer), 19th – 23rd September 2021, Angers, France. European Safety and Reliability Association (ESRA). Research Publishing Services, Singapore.
Pages: 2573–2580; ISBN: 978-981-18-2016-8; doi: 10.3850/978-981-18-2016-8_183-cd

[184] Christoph Rosebrock and Stefan Bracke:
Detection of defects on printed circuit boards using instance segmentation.
In: Proceedings of the 31st European Safety and Reliability Conference (Eds.: Bruno Castanier, Marko Cepin, David Bigaud and Christophe Berenguer), 19th – 23rd September 2021, Angers, France. European Safety and Reliability Association (ESRA). Research Publishing Services, Singapore.
Pages: 1047–1053; ISBN: 978-981-18-2016-8; doi:10.3850/978-981-18-2016-8_260-cd

[183] Stefan Bracke and Franz-Georg Neupert:
New mixture distribution model for mapping and analyzing different failure mechanism caused by different stresses.
In: Proceedings of the 31st European Safety and Reliability Conference (Eds.: Bruno Castanier, Marko Cepin, David Bigaud and Christophe Berenguer), 19th – 23rd September 2021, Angers, France. European Safety and Reliability Association (ESRA). Research Publishing Services, Singapore.
Pages: 1999–2004; ISBN: 978-981-18-2016-8; doi:10.3850/978-981-18-2016-8_396-cd

[182] Stefan Bracke and Lars Grams:
COVID-19 pandemic: Analyzing of different pandemic control strategies using saturation models.
In: Proceedings of the 31st European Safety and Reliability Conference (Eds.: Bruno Castanier, Marko Cepin, David Bigaud and Christophe Berenguer), 19th – 23rd September 2021, Angers, France. European Safety and Reliability Association (ESRA). Research Publishing Services, Singapore.
Pages: 2202–2207; ISBN: 978-981-18-2016-8; doi:10.3850/978-981-18-2016-8_397-cd

[181] Marcin Hinz, Lea Hannah Günther and Stefan Bracke:
A comprehensive parameter study regarding the neural networks based monitoring of grinded.
In: Proceedings of the 31st European Safety and Reliability Conference (Eds.: Bruno Castanier, Marko Cepin, David Bigaud and Christophe Berenguer), 19th – 23rd September 2021, Angers, France. European Safety and Reliability Association (ESRA). Research Publishing Services, Singapore.
Pages: 2014–2021; ISBN: 978-981-18-2016-8; doi:10.3850/978-981-18-2016-8_521-cd

[180] Philipp Heß and Stefan Bracke:
Estimation of the remaining lifetime of shape memory alloy actuators during prototype testing: Analysis of the impact of different currents.
In: Proceedings of the 31st European Safety and Reliability Conference (Eds.: Bruno Castanier, Marko Cepin, David Bigaud and Christophe Berenguer), 19th – 23rd September 2021, Angers, France. European Safety and Reliability Association (ESRA). Research Publishing Services, Singapore.
Pages: 3170–3177, ISBN: 978-981-18-2016-8; https://doi.org/10.3850/978-981-18-2016-8_555-cd

[179] Max Radetzky, Tom Stuerwold and Stefan Bracke:
Image based wear behaviour analysis of cutting tools.
In: Proceedings of the 31st European Safety and Reliability Conference (Eds.: Bruno Castanier, Marko Cepin, David Bigaud and Christophe Berenguer), 19th – 23rd September 2021, Angers, France. European Safety and Reliability Association (ESRA). Research Publishing Services, Singapore.
Pages: 2659–2664, ISBN: 978-981-18-2016-8; doi: 10.3850/978-981-18-2016-8_609-cd

[178] Max Radetzky and Stefan Bracke:
Analysis of aperiodic surface topography: The impact of measurement uncertainty on surface parameter correlation.
Proceedings of 17th IFAC INCOM 2021 (Symposium on Information Control Problems in Manufacturing), 7.-9. June 2021, Budapest, Hungary (2021).
IFAC-PapersOnLine Volume 54, Issue 1, 2021, Pages: 1236–1240, doi: 10.1016/j.ifacol.2021.08.147

[177] Stefan Bracke, Max Radetzky and Christoph Rosebrock:
Reliability engineering data analytics as base of operations for maintenance planning: A cutting tool case study.
Proceedings of 17th IFAC INCOM 2021 (Symposium on Information Control Problems in Manufacturing), 7.-9. June 2021, Budapest, Hungary (2021).
IFAC-PapersOnLine Volume 54, Issue 1, 2021, Pages: 1260–1265, doi: 10.1016/j.ifacol.2021.08.151

[176] Stefan Bracke und Alicia Puls:
Die COVID-19-Ausbreitung ist nicht grippal! Analyse des Infektionsgeschehens mit Methoden der Zuverlässigkeitstechnik.
In: Qualität und Zuverlässigkeit (QZ), Carl Hanser Verlag, Jahrgang 66 (2021) 4.

[175] Kamil Kowol, Matthias Rottmann, Stefan Bracke and Hanno Gottschalk:
YOdar: Uncertainty-based Sensor Fusion for Vehicle Detection with Camera and Radar Sensors.
In: Proceedings of ICAART 2021, 4th – 6th February 2021. International Conference on Agents and Artificial Intelligence. Scitepress Digital Library, Ed. Pages: 177–186; doi:10.5220/0010239301770186

[174] Max Radetzky, Philipp Heß, Pit Fiur and Stefan Bracke:
The influence of contact force variation on surface topographies within high precision cutlery fine grinding.
Proceedings of 9th CIRP HPC (Conference on High Performance Cutting), 24.-26. May 2021, Sheffield, UK (2021)
Procedia CIRP Volume 101, 2021, Pages: 186–189, doi: 10.1016/j.procir.2021.02.021

[173] Alicia Puls and Stefan Bracke:
COVID-19 pandemic risk analytics: Data mining with reliability engineering methods for analyzing spreading behavior and comparison with infectious diseases.
In: van Gulijk C., Zaitseva E. (eds) Reliability Engineering and Computational Intelligence. Studies in Computational Intelligence, Vol. 976. Springer.
Pages: 293–307 (2021); ISBN: 978-3-030-74555-4 ; doi:10.1007/978-3-030-74556-1_18

[172] Shuho Yamada, Shogo Miyajima, Tetsuo Yamada, Stefan Bracke and Masato Inoue:
Decision Support Method for Upgrade Cycle Planning and Product Architecture Design of an Upgradable Product.
In: International Journal of Automation Technology, Fuji Technology Press, Vol. 14, No. 6, Pages: 919–929. (2020); doi:10.20965/ijat.2020.p0919

[171] Masato Inoue, Shuho Yamada, Shogo Miyajima, Katsuhide Ishii, Rina Hasebe, Kazuhiro Aoyama, Tetsuo Yamada and Stefan Bracke:
A Modular Design Strategy Considering Sustainability and Supplier Selection.
In: Journal of Advanced Mechanical Design, Systems, and Manufacturing, The Japan Society of Mechanical Engineers, Vol. 14, No. 2, Pages: JAMDSM0023;
doi:10.1299/jamdsm.2020jamdsm0023. (2020)

[170] Stefan Bracke, Alicia Puls and Lars Grams:
COVID-19 pandemic data analytics: Data heterogeneity, spreading behavior, and lockdown impact.
In: Proceedings of ESREL 2020 PSAM 15 (Eds.: Piero Baraldi, Francesco Di Maio and Enrico Zio), 1st – 6th November 2020, Venice, Italy. European Safety and Reliability Association (ESRA); International Association for Probabilistic Safety Assessment and Management. Research Publishing Services, Singapore, (2020). Pages: 422–429; ISBN: 978-981-14-8593-0; doi:10.3850/978-981-14-8593-0_5792-cd

[169] Stefan Bracke and Franz-Georg Neupert:
Estimation of failure probabilities for maintenance activities regarding product fleets in use: Censored data handling – An automotive engineering case study
In: Proceedings of ESREL 2020 PSAM 15 (Eds.: Piero Baraldi, Francesco Di Maio and Enrico Zio), 1st – 6th November 2020, Venice, Italy. European Safety and Reliability Association (ESRA); International Association for Probabilistic Safety Assessment and Management. Research Publishing Services, Singapore, (2020). Pages: 2938–2944; ISBN: 978-981-14-8593-0; doi:10.3850/978-981-14-8593-0_5793-cd

[168] Stefan Bracke and Alicia Puls:
Weibull distribution model: Empirical study with regard to the scatter behaviour of threshold parameter - impact on risk analytics.
In: Proceedings of ESREL 2020 PSAM 15 (Eds.: Piero Baraldi, Francesco Di Maio and Enrico Zio), 1st – 6th November 2020, Venice, Italy. European Safety and Reliability Association (ESRA); International Association for Probabilistic Safety Assessment and Management. Research Publishing Services, Singapore, (2020). Pages: 4818–4825; ISBN: 978-981-14-8593-0; doi:10.3850/978-981-14-8593-0_4148-cd

[167] Stefan Bracke and Lea Hannah Günther:
Concept for a second life use of traction batteries in private households:
The impact of an adapted environmental setting on the product reliability.
In: Proceedings of ESREL 2020 PSAM 15 (Eds.: Piero Baraldi, Francesco Di Maio and Enrico Zio), 1st – 6th November 2020, Venice, Italy. European Safety and Reliability Association (ESRA); International Association for Probabilistic Safety Assessment and Management. Research Publishing Services, Singapore, (2020). Pages: 4178–4185; ISBN: 978-981-14-8593-0; doi:10.3850/978-981-14-8593-0_5827-cd

[166] Marcin Hinz, Lea Hannah Günther and Stefan Bracke:
Application of Computer Vision in the Analysis and Prediction of Fine Grinded Surfaces.
In: Proceedings of ESREL 2020 PSAM 15 (Eds.: Piero Baraldi, Francesco Di Maio and Enrico Zio), 1st – 6th November 2020, Venice, Italy. European Safety and Reliability Association (ESRA); International Association for Probabilistic Safety Assessment and Management. Research Publishing Services, Singapore, (2020). Pages: 1718–1725; ISBN: 978-981-14-8593-0; doi:10.3850/978-981-14-8593-0_4477-cd

[165] Dominik Brüggemann, Robin Chan, Matthias Rottmann, Hanno Gottschalk and Stefan Bracke:
Detecting out of distribution objects in semantic segmentation of street scenes.
In: Proceedings of ESREL 2020 PSAM 15 (Eds.: Piero Baraldi, Francesco Di Maio and Enrico Zio), 1st – 6th November 2020, Venice, Italy. European Safety and Reliability Association (ESRA); International Association for Probabilistic Safety Assessment and Management. Research Publishing Services, Singapore, (2020). Pages: 3023–3030; ISBN: 978-981-14-8593-0; doi:10.3850/978-981-14-8593-0_4518-cd

[164] Christoph Rosebrock, Lars Grams and Stefan Bracke:
Fault detection in the manufacturing process of printed circuit boards using computer vision.
In: Proceedings of ESREL 2020 PSAM 15 (Eds.: Piero Baraldi, Francesco Di Maio and Enrico Zio), 1st – 6th November 2020, Venice, Italy. European Safety and Reliability Association (ESRA); International Association for Probabilistic Safety Assessment and Management. Research Publishing Services, Singapore, (2020). Pages: 1703–1709; ISBN: 978-981-14-8593-0; doi:10.3850/978-981-14-8593-0.

[163] Philipp Heß and Stefan Bracke:
An approach to predict the lifetime of shape memory actuators based on accelerated testing measurements.
In: Proceedings of ESREL 2020 PSAM 15 (Eds.: Piero Baraldi, Francesco Di Maio and Enrico Zio), 1st – 6th November 2020, Venice, Italy. European Safety and Reliability Association (ESRA); International Association for Probabilistic Safety Assessment and Management. Research Publishing Services, Singapore, (2020). Pages: 1528–1535, ISBN: 978-981-14-8593-0; https://doi.org/10.3850/978-981-14-8593-0_4332-cd

[162] Semih Severengiz, Nora Schelte and Stefan Bracke:
Analysis of the environmental impact of e-scooter sharing services considering product reliability characteristics and durability.
In: Proceedings of CIRPe 2020, 14^th – 16^th October 2020, 8^th CIRP Global Web Conference - Flexible Mass Customisation, (2020).
Pages: 181–188; doi:10.1016/j.procir.2021.01.072

[161] Max Radetzky and Stefan Bracke:
Manufacturing process parameter adaptation for high precision fine grinded surface topographies: Customised approach within cutlery case study.
In: Proceedings of CIRPe 2020, 14^th – 16^th October 2020, 8^th CIRP Global Web Conference - Flexible Mass Customisation, (2020).
Procedia CIRP Volume 96, Pages: 319–323, doi:10.1016/j.procir.2021.01.094

[160] Stefan Bracke:
Preventive maintenance planning based on Weibull distribution models: The impact of the random scatter behaviour of the threshold parameter.
In: Proceedings of AMEST2020, 10^th – 11^th September 2020, Virtual Workshop, Cambridge, UK. International Federation of Atomatic Control (IFAC); 4^th IFAC Workshop on Advanced Maintanance Engineering, Services and Technologies, (2020). Pages: 161–166; doi: 10.1016/j.ifacol.2020.11.026

[159] Christoph Rosebrock and Stefan Bracke:
Approach for the Determination of Maintenance Strategies Based on an Empirical Case Study.
In: Proceedings of AMEST2020, 10^th – 11^th September 2020, Virtual Workshop, Cambridge, UK. International Federation of Atomatic Control (IFAC); 4^th IFAC Workshop on Advanced Maintanance Engineering, Services and Technologies, (2020). IFAC-PapersOnLine Volume 53, Issue 3, 2020, Pages: 149–154,
doi: 10.1016/j.ifacol.2020.11.024

[158] Dominik Brüggemann, Stefan Bracke, Hanno Gottschalk, Matthias Rottmann, Kira Maag, Robin Chan and Marius Schubert:
Ansätze zur Verbesserung KI-basierter Systeme für das autonome Fahren.
In: Dr. B. Leyendecker (Hrsg.): „Qualitätsmanagement in den 20er Jahren - Trends und Perspektiven“, Bericht zur GQW-Jahrestagung 2020 in Koblenz, Gesellschaft für Qualitätswissenschaft e.V. (2021).
Seite: 100–119, ISBN: 978-3-662-63242-0; https://doi.org/10.1007/978-3-662-63243-7_6

[157] Philipp Heß and Stefan Bracke:
Smart material actuators as a contributor for IoT-based smart applications and systems: Analyzing prototype and process measurement data of shape memory actuators for reliability and risk prognosis. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2020, Volume 14, Issue 2,
Pages: JAMDSM0026, Released on J-STAGE March 23, 2020, Online ISSN 1881-3054; doi:10.1299/jamdsm.2020jamdsm0026

[156] Christoph Rosebrock and Stefan Bracke:
Simulation Of Anode Corrosion In The Electrowinning Process Of Non-Ferrous Metals.
In: Proceedings of RAMS 2020, 27^th – 30^th January 2020, Palm Springs, USA. 66^th Annual Reliability and Maintainability Symposium, (2020).
https://doi.org/10.1109/RAMS48030.2020.9153626

[155] Sebastian Sochacki, Fabian Reinecke and S. Bracke:
Ansatz zur Anpassung von Wartungs- und Instandhaltungspaketen auf Basis maschineller Lernalgorithmen im Hinblick auf den zuverlässigen Betrieb technisch komplexer Produkte.
In: Schmitt, R. H. (Hrsg.): Potenziale Künstlicher Intelligenz für die Qualitätswissenschaft: Bericht zur GQW-Jahrestagung 2018 in Nürnberg, Band 15, Seite: 221–236, Springer-Verlag, (2020). ISBN: 978-3-662-60691-9; https://doi.org/10.1007/978-3-662-60692-6_13

[154] Philipp Heß and Stefan Bracke:
Zuverlässigkeitstechnik bei Formgedächtnisaktoren: Entwicklung von Prüfstandstechnik und Erprobungsprogramm.
In: Schmitt, R. H. (Hrsg.): Potenziale Künstlicher Intelligenz für die Qualitätswissenschaft: Bericht zur GQW-Jahrestagung 2018 in Nürnberg,
Band 15, Seite: 39–56, Springer-Verlag, (2020). ISBN: 978-3-662-60691-9; https://doi.org/10.1007/978-3-662-60692-6_3

[153] Shuho Yamada, Shogo Miyajima, Rina Hasebe, Tetsou Yamada, Stefan Bracke, and Masato Inoue:
Decision support method for planning upgrade cycle and designing product architecture of upgradable product service system.
EcoDesign 2019: 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, 25th – 27th November, Yokohama, Japan (2019).

[152] Lea Hannah Günther, Marcin Hinz and Stefan Bracke:
Verwendung von Computer Vision in Kombination mit maschinellem Lernen zur Analyse der Oberflächenbeschaffenheit von fein geschliffenen Messerklingen.
In: Schmitt, R. H. (Hrsg.) Datengetriebenes Qualitätsmanagement: Bericht zur GQW-Jahrestagung 2019 in Aachen, Seite: 96–113, Springer Vieweg, Berlin, Heidelberg, (2020). ISBN: 978-3-662-62441-8; https://doi.org/10.1007/978-3-662-62442-5_6

[151] Shota Hasegawa, Tetsuo Yamada and Stefan Bracke:
Life Cycle Option Selection of Disassembly Part for Recovery Rate and Cost Considering Reliability.
In: Proceedings of ESREL 2019 (Eds.: M. Beer and E. Zio), 22nd – 26th September 2019, Germany. European Safety and Reliability Association (ESRA). Research Publishing, Singapore, Pages: 2834–2841; ISBN: 978-981-11-2724-3; doi: 10.3850/978-981-11-2724-3_0291-cd, (2019).

[150] Thomas Köttermann and Stefan Bracke:
Customer segments and their reliability characteristics generated from field operation and warranty data.
In: Proceedings of ESREL 2019 (Eds.: M. Beer and E. Zio), 22nd – 26th September 2019, Germany. European Safety and Reliability Association (ESRA). Research Publishing, Singapore, Pages: 2332–2339; ISBN: 978-981-11-2724-3; doi: 10.3850/978-981-11-2724-3_0466-cd, (2019).

[149] Stefan Bracke and Monika Piskala:
Development of innovative products versus safety engineering: Avoiding goal conflicts.
In: Proceedings of ESREL 2019 (Eds.: M. Beer and E. Zio), 22nd – 26th September 2019, Germany. European Safety and Reliability Association (ESRA). Research Publishing, Singapore, Pages: 2860–2866; ISBN: 978-981-11-2724-3; doi: 10.3850/978-981-11-2724-3_0661-cd, (2019).

[148] Stefan Bracke and Sebastian Sochacki:
Saturation Models to Assess Risk in Product Fleets during the Use Phase.
In: Proceedings of ESREL 2019 (Eds.: M. Beer and E. Zio), 22nd – 26th September 2019, Germany. European Safety and Reliability Association (ESRA). Research Publishing, Singapore, Pages: 1018–1024; ISBN: 978-981-11-2724-3; doi: 10.3850/978-981-11-2724-3_0189-cd, (2019).

[147] Philipp Heß and Stefan Bracke:
Reliability and degradation analysis of smart material actuators.
In: Proceedings of ESREL 2019 (Eds.: M. Beer and E. Zio), 22nd – 26th September 2019, Germany. European Safety and Reliability Association (ESRA). Research Publishing, Singapore, Pages: 1255–1261; ISBN: 978-981-11-2724-3; doi: 10.3850/978-981-11-2724-3_0541-cd, (2019).

[146] Christoph Rosebrock, Marcin Hinz and Stefan Bracke:
Approach for the simulation of anode corrosion in electrolysis processes.
In: Proceedings of ESREL 2019 (Eds.: M. Beer and E. Zio), 22nd – 26th September 2019, Germany. European Safety and Reliability Association (ESRA). Research Publishing, Singapore, Pages: 1897–1903; ISBN: 978-981-11-2724-3; doi: 10.3850/978-981-11-2724-3_0583-cd, (2019).

[145] Fabian Reinecke, Sebastian Sochacki and Stefan Bracke:
Dynamic Adaption of Maintenance Packages within the Product Use Phase using Machine Learning Methods regarding Operating Data.
In: Proceedings of ESREL 2019 (Eds.: M. Beer and E. Zio), 22nd – 26th September 2019, Germany. European Safety and Reliability Association (ESRA). Research Publishing, Singapore, Pages: 554–561; ISBN: 978-981-11-2724-3; doi: 10.3850/978-981-11-2724-3_0309-cd, (2019).

[144] Marcin Hinz, Dominik Brüggemann and Stefan Bracke:
Comparison of inductive learning and neural networks in condition monitoring systems of complex machines.
In: Proceedings of ESREL 2019 (Eds.: M. Beer and E. Zio), 22nd – 26th September 2019, Germany. European Safety and Reliability Association (ESRA). Research Publishing, Singapore, Pages: 1141–1147; ISBN: 978-981-11-2724-3; doi: 10.3850/978-981-11-2724-3_0338-cd, (2019).

[143] Sebastian Sochacki, Fabian Reinecke and Stefan Bracke:
Prediction of failure candidates of technical products in the field based on a multivariate usage profile using machine learning algorithms regarding operating data.
In: Ahram, Karwowski et al. (Hg.) 2020 – Human systems engineering and design: Proceedings of International Conference on Human Systems Engineering and Design: Future Trends and Applications (IHSED) 2019, 16. – 18. September, München, Germany (2019), Pages 555-560; ISBN: 978-3-030-27928-8; https://doi.org/10.1007/978-3-030-27928-8_84

[142] Christoph Rosebrock and Stefan Bracke:
Evaluation of the Sustainable Efficiency of two Manufacturing Processes using Life-Cycle Assessment and Efficiency Analysis.
9th IFAC Conference on Manufacturing Modelling, Management and Control MIM 2019, Berlin, Germany, 28–30 August 2019. Edited by Dmitry Ivanov, Alexandre Dolgui, Farouk Yalaoui. IFAC-PapersOnLine Vol. 52, Issue 13,
Pages: 2255–2260; DOI: 10.1016/j.ifacol.2019.11.541 (2019).

[141] Stefan Bracke and Berna Ulutas:
Basic structure of lessons learned approach to improve manufacturing
processes: A case study.
9th IFAC Conference on Manufacturing Modelling, Management and Control MIM 2019, Berlin, Germany, 28–30 August 2019. Edited by Dmitry Ivanov, Alexandre Dolgui, Farouk Yalaoui. IFAC-PapersOnLine Vol. 52, Issue 13,
Pages: 1010–1015; DOI: 10.1016/j.ifacol.2019.11.327 (2019).

[140] Max Radetzky, Christoph Rosebrock and Stefan Bracke:
Approach to adapt manufacturing process parameters systematically based on machine learning algorithms.
9th IFAC Conference on Manufacturing Modelling, Management and Control MIM 2019, Berlin, Germany, 28–30 August 2019. Edited by Dmitry Ivanov, Alexandre Dolgui, Farouk Yalaoui. IFAC-PapersOnLine Vol. 52, Issue 13,
Pages: 1773–1778; DOI: 10.1016/j.ifacol.2019.11.458 (2019).

[139] Max Radetzky, Lars Grams, Berna Ulutas and Stefan Bracke:
Sustainability versus efficiency of manufacturing process: Structured comparison of two high precision fine grinding processes.
Proceedings of ICPR 2019, August 9 - 14, Chicago, USA (2019). Edited by Cihan H. Dagli, Gürsel A. Süer. Vol. 39, Pages: 859–867;
https://doi.org/10.1016/j.promfg.2020.01.410

[138] Stefan Bracke, Sebastian Sochacki and Max Radetzky:
Multivariate data analytics in surface topography assessments: Case study high precision fine grinding processes.
Proceedings of ICPR 2019, August 9 - 14, Chicago, USA (2019). Edited by Cihan H. Dagli, Gürsel A. Süer. Vol. 39, Pages: 1752–1761;
https://doi.org/10.1016/j.promfg.2020.01.264

[137] Marcin Hinz, Max Radetzky, Lea Hannah Günther, Pit Fiur and Stefan Bracke:
Machine Learning driven image analysis of fine grinded knife blade surface topographies.
Proceedings of ICPR 2019, 9th – 15th August, Chicago, USA (2019). Edited by Cihan H. Dagli, Gürsel A. Süer. Vol. 39, Pages: 1817–1826;
doi: 10.1016/j.promfg.2020.01.257

[136] Marcin Hinz, Dominik Brüggemann and Stefan Bracke:
Framework for Customized, Machine Learning driven Condition Monitoring System for Manufacturing.
Proceedings of ICPR 2019, 9th – 15th August, Chicago, USA (2019). Edited by Cihan H. Dagli, Gürsel A. Süer. Vol. 39, Pages: 243–250;
https://doi.org/10.1016/j.promfg.2020.01.331

[135] Shota Hasegawa, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue and Stefan Bracke:
Disassembly Reuse Part Selection for Recovery Rate and Cost with Life-time Analysis.
International Journal of Automation Technology (2018), 12(6), Pages: 822–832;
DOI: 10.20965/ijat.2018.p0822.

[134] Stefan Bracke and Max Radetzky:
Aperiodic surface topographies based on high precision grinding processes: Analysis of cutting fluid and cleaning process influences using non-parametric statistics.
Proceedings: Intelligent Systems in Production Engineering and Maintenance - ISPEM 2018, Wrocław, Poland; 17th – 18th September 2018, Springer (2018). Pages: 44–55; ISBN: 978-3-319-97489-7; doi: 10.1007/978-3-319-97490-3_5

[133] Marcin Hinz, Dominik Brüggemann, Peter Dültgen and Stefan Bracke:
Concept development for a test rig and analysis of the experiments for standardized testing of smart materials.
Proceedings: The 14th Probabilistic Safety Assessment and Management, PSAM 14, September 16th – 21th, 2018, Los Angeles, U.S.A. (2018).

[132] Marcin Hinz, Dominik Brüggemann and Stefan Bracke:
On the Application of Machine Learning Techniques in Condition Monitoring Systems of Complex Machines.
Proceedings: The 14th Probabilistic Safety Assessment and Management, PSAM 14, September 16th – 21th, 2018, Los Angeles, U.S.A. (2018).

[131] Stefan Bracke, Max Radetzky, Christoph Rosebrock and Berna Ulutas:
Efficiency and Effectivity of high precision grinding manufacturing processes: An approach based on combined DEA and Cluster analyses.
Proceedings: CIRP Conference on Intelligent Computation in Manufacturing Engineering (ICME), 18-20 July 2018, Gulf of Naples, Italy (2018).
Pages: 292–295; ISBN: 978-1-5108-8265-2; https://doi.org/10.1016/j.procir.2019.02.069

[130] Shuho Yamada, Takumi Sugiura, Tetsuo Yamada, Stefan Bracke and Masato Inoue:
A Strategy of providing upgradable product service system for economic and environmental balance.
In: M. Peruzzini, M. Pellicciari, C. Bil, J. Stjepandić, N. Wognum: Advanced in Transdisicplinary Engienering – Transdisciplinary Engineering Methods for Social Innovation of Industry 4.0. Proceedings of TE 2018. July 3 – 6, 2018, Modena, Italy. IOS Press, Pages: 1155–1164, doi:10.3233/978-1-61499-898-3-1155, (2018).

[129] Stefan Bracke, Max Radetzky and Peter Born:
Multivariate analyses of aperiodic surface topologies within high precision grinding processes.
Proceedings: CIRP Conference on Intelligent Computation in Manufacturing Engineering (ICME), 18-20 July 2018, Gulf of Naples, Italy (2018).
Pages: 286–291; ISBN: 9781510882652; doi: 10.1016/j.procir.2019.02.068

[128] Stefan Bracke, Marcin Hinz, Coen van Gulijk, Frank Gronwald, Martin Münker, Masato Inoue, Shuho Yamada, Edoardo Patelli, Berna Ulutas, Marco Bonato and Tetsuo Yamada:
Reliability engineering based on operating data and monitoring systems within technical products: challenges, requirements and approaches.
In: S. Haugen, J. E. Vinnem, A. Barros, T. Kongsvik, C. v. Gulijk: Safety and Reliability – Safe Societies in a Changing World. Proceedings of ESREL 2018. June 17 – 21, 2018, Trondheim, Norway. CRC Press, Pages: 1069–1076,
doi: 10.1201/9781351174664-135, (2018).

[127] Stefan Bracke and Masato Inoue:
Reliability and safety engineering: The principles innovation and optimisation of German and Japanese product constructions.
In: S. Haugen, J. E. Vinnem, A. Barros, T. Kongsvik, C. v. Gulijk: Safety and Reliability – Safe Societies in a Changing World. Proceedings of ESREL 2018. June 17 – 21, 2018, Trondheim, Norway. CRC Press, Pages: 221–226,
doi: 10.1201/9781351174664-28, (2018).

[126] Marcin Hinz, Andreas Lücker, Christian Klostermann and Stefan Bracke:
Statistical comparison of three different measurement technologies.
In: S. Haugen, J. E. Vinnem, A. Barros, T. Kongsvik, C. v. Gulijk: Safety and Reliability – Safe Societies in a Changing World. Proceedings of ESREL 2018. June 17 – 21, 2018, Trondheim, Norway. CRC Press, Pages: 1133–1138,
doi: 10.1201/9781351174664-143, (2018).

[125] Fabian Reinecke and Stefan Bracke:
The use of simulation techniques in reliability engineering and its applicability in data-driven facility simulation.
In: S. Haugen, J. E. Vinnem, A. Barros, T. Kongsvik, C. v. Gulijk: Safety and Reliability – Safe Societies in a Changing World. Proceedings of ESREL 2018. June 17 – 21, 2018, Trondheim, Norway. CRC Press, Pages: 2013–2019,
doi: 10.1201/9781351174664-253, (2018).

[124] Stefan Bracke, Marcin Hinz, Bianca Backes und Sebastian Sochacki:
Die Verifikation der Produktzuverlässigkeit: Neue Methoden der multivariaten Analyse und Prognose in Erprobung, Herstellung und im Feldeinsatz.
In: S. Bracke (Hrsg.): Qualitätswissenschaft und Exzellenz. Denkanstöße zur Unternehmensführung, Qualitätsabsicherung, Zuverlässigkeitstechnik und Arbeitsorganisation. Berichte aus der Zuverlässigkeitsanalytik und Risikoforschung (Band 1), Shaker Verlag, Seite: 1–46, 2018.
ISBN: 978-3-8440-5712-6

[123] Stefan Bracke:
Qualitätswissenschaft und Exzellenz: Eine Hommage an Herbert Schnauber.
In: S. Bracke (Hrsg.): Qualitätswissenschaft und Exzellenz. Denkanstöße zur Unternehmensführung, Qualitätsabsicherung, Zuverlässigkeitstechnik und Arbeitsorganisation. Berichte aus der Zuverlässigkeitsanalytik und Risikoforschung (Band 1), Shaker Verlag, Seite: IV–VII, 2018.
ISBN: 978-3-8440-5712-6

[122] Shota Hasegawa, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue and Stefan Bracke:
Disassembly Parts Selection for Material-based CO2 Saving Rate and Cost Considering Reuse.
Proceedings: International Conference on Remanufacturing 2017 (ICoR-17), 24th – 26th October 2017, Linköping, Sweden, Pages: 175–188 (2017)

[121] Tetsuo Yamada, Shota Hasegawa, Yuki Kinoshita, Shuho Yamada, Masato Inoue, Christoph Rosebrock and Stefan Bracke:
Process integration concept for waste reduction among manufacturing planning, modularization and validation.
Proceedings: Elsevier Publisher: 15th Global Conference on Sustainable Manufacturing (GCSM), 25th – 27th September 2017, Haifa, Israel, (2017). Pages: 337–344; ISBN: 978-1-5108-5959-3; https://doi.org/10.1016/j.promfg.2018.02.129

[120] Stefan Bracke and Bianca Backes:
Multivariate process capability, process validation and risk analytics based on product characteristic sets: case study piston rod.
In: A. Burduk and D. Mazurkiewicz (Eds.): Intelligent Systems in Production Engineering and Maintenance - ISPEM 2017, Wrocław, Poland; 28th – 29th September 2017, Springer, (2017). Pages: 324–335; ISBN: 978-3-319-64464-6;
doi: 10.1007/978-3-319-64465-3_32

[119] Chise Shibata, Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue:
Proposal of a Component Upgradeability Indicator from Comprehensive Perspectives (Case Study of Laptop Modules).
Proceedings: 4th International Conference on Design Engineering and Science (ICDES), 17th – 19th September, 2017, Aachen, Germany (2017).

[118] Chise Shibata, Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue:
Proposal of an Adaptability Evaluation Indicator for Component’s Life Cycle Options from Environmental, Economical, Functional and Reliable Perspectives.
Proceedings: International Conference on Design and Concurrent Engineering 2017 (iDECON 2017), 7th – 8th September, 2017, Osaka, Japan (2017).

[117] Shota Hasegawa, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue and Stefan Bracke:
Disassembly Parts Selection for Recovery Rate and Cost Considering Reuse.
Proceedings: 24th International Conference on Production Research, ICPR 2017, Poznan, Poland, 30th July – 3rd August 2017.
DOI: 10.12783/dtetr/icpr2017/17658

[116] Stefan Bracke, Bianca Backes, Edoardo Patelli, Masato Inoue, Shuho Yamada, Berna Ulutas, Christoph Hartl, Peter Dültgen, Marek Młyńczak and Gürsel Suel:
Challenges, trends and approaches of future reliability engineering in high precision manufacturing processes.
Proceedings: 24th International Conference on Production Research, ICPR 2017, Poznan, Poland, 30th July – 3rd August 2017.
DOI: 10.12783/dtetr/icpr2017/17577

[115] Stefan Bracke, Christoph Rosebrock, Sabine Schlaeger, Frank Winter and Fabrice Lauf:
Remanufacturing within a sustainable manufacturing strategy: recycling of lead anodes.
Proceedings: 24th International Conference on Production Research, ICPR 2017, Poznan, Poland, 30th July – 3rd August 2017.
DOI: 10.12783/dtetr/icpr2017/17657

[114] Marcin Hinz, Annika Müller, Bianca Backes and Stefan Bracke:
Simulation driven optimisation of testing conditions of dental implants.
In: M. Cepin, R. Bris; Safety and Reliability – Theory and Applications; ESREL 2017, Portorož, Slovenia, 18th – 22nd June 2017; European Safety and Reliability Association, ESRA, ISBN: 978-1-138-62937-0;
doi: 10.1201/9781315210469-248, (2017).

[113] Stefan Bracke, Fabian Reinecke and Roland Goertz:
Risk Scenarios, Reliability Challenges and Safety Concept Approach for Second Life Lithium-Ion Battery Systems out of Automotive Technologies.
In: M. Cepin, R. Bris; Safety and Reliability – Theory and Applications; ESREL 2017, Portorož, Slovenia, 18th – 22nd June 2017; European Safety and Reliability Association, ESRA, ISBN: 978-1-138-62937-0;
doi: 10.1201/9781315210469-156, (2017).

[112] Christoph Rosebrock, Marcin Hinz, Fabian Reinecke and Stefan Bracke:
Modelling the reliability of lead anodes in the electrowinning process of non-ferrous metals using machine learning.
In: M. Cepin, R. Bris; Safety and Reliability – Theory and Applications; ESREL 2017, Portorož, Slovenia, 18th – 22nd June 2017; European Safety and Reliability Association, ESRA, ISBN: 978-1-138-62937-0;
doi: 10.1201/9781315210469-453, (2017).

[111] Sebastian Sochacki and Stefan Bracke:
The comparison of the estimation and prognosis of failure behaviour in product fleets by the RAPP method with state-of-the-art risk prognosis models within the usage phase.
In: M. Cepin, R. Bris; Safety and Reliability – Theory and Applications; ESREL 2017, Portorož, Slovenia, 18th – 22nd June 2017; European Safety and Reliability Association, ESRA, ISBN: 978-1-138-62937-0;
doi: 10.1201/9781315210469-439, (2017).

[110] Annika Müller, Marcin Hinz and Stefan Bracke:
Auslegung von Zeitraffertests auf Basis numerischer Simulationen im Rahmen der Dentalimplantaterprobung.
28. Fachtagung Technische Zuverlässigkeit 2017,
Leonberg, 17. - 18.05.2017; Veranstalter: Verein Deutscher Ingenieure.
In: VDI Berichte 2307, Seite: 253–268 (2017).

[109] Sebastian Sochacki, Andreas Lücker and Stefan Bracke:
Beitrag zur Schadensfallprognose von technisch komplexen Produkten unter Berücksichtigung der multivariaten Nutzungsart von Flottenteilen.
In: Berichte zum Qualitätsmanagement (Hrsg.: H. Otten, J. Görtz und S. Pollak), Gesellschaft für Qualitätswissenschaft e.V., Band 14, Seite: 137–151, FAU University Press (2017). ISBN: 978-3-96147-021-1

[108] Christoph Rosebrock and Stefan Bracke:
Entwicklung eines Ausfallmodells zur Charakterisierung der Zuverlässigkeit von Anoden in der elektrolytischen Metallgewinnung.
In: Berichte zum Qualitätsmanagement (Hrsg.: H. Otten, J. Görtz und S. Pollak), Gesellschaft für Qualitätswissenschaft e.V., Band 14, Seite: 43–56, FAU University Press (2017). ISBN: 978-3-96147-021-1

[107] Marcin Hinz, Fabian Hienzsch and Stefan Bracke:
Detection of distinctions in car fleets based on measured and simulated data.
Proceedings: RAMS 2017 – 63rd Annual Reliability and Maintainability Symposium, Orlando, Florida, U.S.A. (2017). ISBN: 978-1-5090-5284-4; https://doi.org/10.1109/RAM.2017.7889775

[106] Christoph Rosebrock and Stefan Bracke:
Failure modelling of lead anodes in the electrowinning process of non-ferrous metals.
Proceedings: RAMS 2017 – 63rd Annual Reliability and Maintainability Symposium, Orlando, Florida, U.S.A. (2017). ISBN: 978-1-5090-5284-4;
doi: 10.1109/RAM.2017.7889765

[105] Stefan Bracke, Shuho Yamada, Yuki Kinoshita, Masato Inoue and Tetsuo Yamada:
Decision making within the conceptual design phase of eco-friendly products.
Procedia Manufacturing Volume 8, Elsevier Publisher: 14th Global Conference on Sustainable Manufacturing (GCSM), 3 – 5 October 2016, Stellenbosch, South Africa, Pages: 463–470, 2017. https://doi.org/10.1016/j.promfg.2017.02.059

[104] Christoph Rosebrock and Stefan Bracke:
Comparison and Evaluation of concepts for future recycling processes regarding attrited lead anodes used in the electrowinning process of non-ferrous metals.
Procedia Manufacturing Volume 8, Elsevier Publisher: 14th Global Conference on Sustainable Manufacturing (GCSM), 3 – 5 October 2016, Stellenbosch, South Africa, Pages: 627–634, 2017. DOI: 10.1016/j.promfg.2017.02.080

[103] Stefan Bracke, Berna Ulutas and Christoph Rosebrock:
Concept for analysing product sustainability regarding eco-related product perceptionand efficiency within a product spectrum.
Procedia Manufacturing Volume 8, Elsevier Publisher: 14th Global Conference on Sustainable Manufacturing (GCSM), 3 – 5 October 2016, Stellenbosch, South Africa, Pages: 28–35, 2017. DOI: 10.1016/j.promfg.2017.02.003

[102] Stefan Bracke and Bianca Backes:
Produktzuverlässigkeit entlang des Produktentstehungsprozesses.
In: BUW.OUTPUT, (Hrsg.: M. Scheffel), Bergische Universität Wuppertal, Nr. 16, Seite: 34–39, (2016).

[101] Marcin Hinz, Fabian Hienzsch and Stefan Bracke:
Analysis of simulated and recorded data of car fleets based on machine learning algorithms.
Proceedings: The 13th Probabilistic Safety Assessment and Management, PSAM 13, Seoul, Korea, October 2nd – 7th, 2016 (2016).

[100] Marcin Hinz, Fabian Hienzsch and Stefan Bracke:
Development of two methods for the characterisation of an automotive fleet behaviour based on the simulation of single car rides.
In: L. Walls, M. Revie, T. Bedford; Risk, Reliability and Safety: Innovating Theory and Practice; ESREL 2016, Glasgow, United Kingdom, 25th – 29th September 2016; European Safety and Reliability Association, ESRA, Pages: 1593–1598; ISBN: 978-1-138-02997-2; doi: 10.1201/9781315374987-239, (2016).

[99] Annika Müller, Marcin Hinz and Stefan Bracke:
Optimization of the dental implant testing based on FEM simulation of fatigue and accelerated life.
In: L. Walls, M. Revie, T. Bedford; Risk, Reliability and Safety: Innovating Theory and Practice; ESREL 2016, Glasgow, United Kingdom, 25th – 29th September 2016; European Safety and Reliability Association, ESRA, Pages: 16–22;
ISBN: 978-1-138-02997-2; doi: 10.1201/9781315374987-5, (2016).

[98] Sebastian Sochacki, Christoph Rosebrock and Stefan Bracke:
Reliability analysis of product fleets based on operating data: separation of risky fleet parts and partial risk prognosis.
In: L. Walls, M. Revie, T. Bedford; Risk, Reliability and Safety: Innovating Theory and Practice; ESREL 2016, Glasgow, United Kingdom, 25th – 29th September 2016; European Safety and Reliability Association, ESRA, Pages: 2061–2067;
ISBN: 978-1-138-02997-2; doi: 10.1201/9781315374987-312, (2016).

[97] Stefan Bracke, Marcin Hinz, Masato Inoue, Edoardo Patelli, Simon Kutz, Hanno Gottschalk, Berna Ulutas, Christoph Hartl, Peter Mörs and Pascal Bonnaud:
Reliability engineering in face of shorten product life cycles: Challenges, technique trends and method approaches to ensure product reliability.
In: L. Walls, M. Revie, T. Bedford; Risk, Reliability and Safety: Innovating Theory and Practice; ESREL 2016, Glasgow, United Kingdom, 25th – 29th September 2016; European Safety and Reliability Association, ESRA, Pages: 2884–2891;
ISBN: 978-1-138-02997-2; doi: 10.1201/9781315374987-438, (2016).

[96] Stefan Bracke, Burkard Höchst und Bianca Backes:
Einer für alle. Bewertung komplexer Herstellungsprozesse mittels eines multivariaten Prozessfähigkeitsindexes
In: Qualität und Zuverlässigkeit (QZ), Carl Hanser Verlag, Ausgabe 12/2016.

[95] Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue:
Upgradable Design for Sustainable Manufacturer Performance and Profitability and Reduction of Environmental Load.
International Journal of Automation Technology (IJAT), doi:10.20965/ijat.2016.p0690, Fuji Technology Press, Vol. 10，No. 5,
Pages: 690–698, JP, (2016).

[94] Masato Inoue, Shuho Yamada, Tetsuo Yamada and Stefan Bracke:
Product Upgradability for Satisfying Future Performance, Low Price and Environmental Loads, and Manufacturer Profitability throughout the Product Lifecycle.
Procedia CIRP Volume 48, Elsevier Publisher: 23rd CIRP Conference on Life Cycle Engineering (CIRP LCE 2016), Pages: 40–44, Germany, Berlin, 22nd – 24th May 2016; (2016). https://doi.org/10.1016/j.procir.2016.03.015

[93] Stefan Bracke, Andreas Lücker and Sebastian Sochacki:
Reliability analysis regarding product fleets in use phase: Multivariate cluster analytics and risk prognosis based on operating data
IEEE 3rd International Conference on Control, Decision and Information Technologies (CoDIT), 6th – 8th April 2016, Saint Julian´s, Malta (2016).
ISBN: 978-1-5090-2188-8; doi: 10.1109/CoDIT.2016.7593562

[92] Stefan Bracke and Bianca Backes:
Beitrag zur Entwicklung multivariater Prozessfähigkeitsindexe zur Bewertung komplexer Herstellungsprozesse am Beispiel von Zerspanungsprozessen in der Dentalwerkzeugtechnik
In: Analyse der Wirksamkeit verpflichtender Q-Methoden und resultierende Erkenntnisse für ein Qualitätsmanagement 4.0 (Hrsg.: R. Refflinghaus, C. Kern, S. Klute-Wenig), kassel university press, Band 6, Seite: 61–77, (2016).
ISBN: 9783737600842

[91] Stefan Bracke, Masato Inoue and Berna Ulutas:
Contribution for analysing, saving and prioritising of lessons learned issues regarding product improvement and future product generations.
Procedia CIRP Volume 40, Elsevier Publisher: 13th Global Conference on Sustainable Manufacturing – Decoupling Growth from Resource Use (Ho-Chi-Minh City, Vietnam), Pages: 179–184, 2016. https://doi.org/10.1016/j.procir.2016.01.095

[90] Stefan Bracke and Christoph Rosebrock:
Contribution for product analyses to quantify and predict similar or diverse eco-related product perception in the usage phase.
Procedia CIRP Volume 40, Elsevier Publisher: 13th Global Conference on Sustainable Manufacturing – Decoupling Growth from Resource Use (Ho-Chi-Minh City, Vietnam), Pages: 68–72, 2016. DOI: 10.1016/j.procir.2016.01.056

[89] Marcin Hinz, Philipp Temminghoff and Stefan Bracke:
Optimization of test procedures based on OBD system specific field data.
Proceedings: RAMS 2016 – 62nd Reliability and Maintainability Symposium, Tucson, Arizona, U.S.A. (2016). ISBN: 978-1-5090-0249-8;
doi: 10.1109/rams.2016.7448018

[88] Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue:
Satisficing Design Method for Sustainable Performance, Profitability for Manufacturer and Reduction of Environmental Loads.
9th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2015), Japan, Tokyo, 2nd – 4th December 2015; (2015). Pages: 392–396

[87] Stefan Bracke and Bianca Backes:
Multidimensional failure probabilities based on symmetric and asymmetric product characteristic distribution models within high precision manufacturing processes.
Proceedings CIE45, 28th – 30th October 2015, Metz, France (2015).
ISBN: 9781510817456

[86] Stefan Bracke, Philipp Temminghoff, Philipp Tursch and Ralf Woll:
Contribution for detection of long-time product reliability problems in the use phase based on analysis of data gathered in online communities.
In: L. Podofillini, B. Sudret, B. Stojadinovic, E. Zio, W. Kröger; Safety and Reliability of complex Engineered Systems; ESREL 2015, Switzerland, Zürich, 7th – 10th September 2015; European Safety and Reliability Association,
Pages: 2033–2039; ISBN: 978-1-138-02879-1; doi:10.1201/b19094-265, (2015).

[85] Stefan Bracke and Sebastian Sochacki:
The estimation and prognosis of failure behaviour in product fleets within the usage phase - RAPP method.
In: L. Podofillini, B. Sudret, B. Stojadinovic, E. Zio, W. Kröger; Safety and Reliability of complex Engineered Systems; ESREL 2015, Switzerland, Zürich, 7th – 10th September 2015; European Safety and Reliability Association,
Pages: 1141–1148; ISBN: 978-1-138-02879-1; doi:10.1201/b19094-151, (2015).

[84] Marcin Hinz, Sebastian Sochacki, Christoph Rosebrock and Stefan Bracke:
Qualitative and quantitative analysis of uncertainties in the reliability analysis of field data within the product usage phase.
In: L. Podofillini, B. Sudret, B. Stojadinovic, E. Zio, W. Kröger; Safety and Reliability of complex Engineered Systems; ESREL 2015, Switzerland, Zürich, 7th – 10th September 2015; European Safety and Reliability Association,
Pages: 2533–2539; ISBN: 978-1-138-02879-1; doi:10.1201/b19094-332, (2015).

[83] Masato Inoue, Shuho Yamada, Tetsuo Yamada and Stefan Bracke:
A Design Method for Product Upgradability with Different Customer Demands.
In: Product Lifecycle Management for Global Market, Series: IFIP Advances in Information and Communication Technology (Ed: S. Fukuda, A. Bernard, B. Gurumoorthy, A. Bouras); Springer, Vol. 442, Pages: 91–100, (2015).
ISBN: 978-3-662-45936-2; doi: 10.1007/978-3-662-45937-9_10

[82] Stefan Bracke and Peter Mörs:
Wem gehören meine Daten?
Sicherheitsforum, Schweizer Fachzeitschrift für Sicherheit, MediaSec Verlag Ausgabe 6, Seite: 25–27, Schweiz (2015).

[81] Stefan Bracke and Bianca Backes:
Multidimensional analyses of manufacturing processes: Process capability within the case study shape drill manufacturing
Proceedings: 15th IFAC/IEEE/IFIP/IFORS Symposium on Information Control in Manufacturing (INCOM 2015; May 11 – 13), Ottawa, Canada (2015).
Pages: 2380–2386; doi: 10.1016/j.ifacol.2015.06.444

[80] Thomas Köttermann, Andreas Jacobi, Christoph Jordan and Stefan Bracke:
Anwendung multivariater Methoden auf automobile Daten zur lastbasierten Zuverlässigkeitsanalyse.
27. Fachtagung Technische Zuverlässigkeit 2015,
Leonberg, 20. – 21.05.2015; Veranstalter: Verein Deutscher Ingenieure,
In: VDI Berichte Band 2260, Seite: 269–280, VDI-Verlag (2015)

[79] Sebastian Sochacki, Marcin Hinz, Johann-Friedrich Luy and Stefan Bracke:
Beitrag zur Bestimmung von Unsicherheiten und Einflussfaktoren von Daten zur Risikoprognose bei Schadensschwerpunkten in der Produktnutzungsphase.
In: Berichte zum Qualitätsmanagement (Hrsg.: S. Bracke, M. Mamrot und P. Winzer), Gesellschaft für Qualitätswissenschaft e.V., Band 13, Seite: 259–274, Shaker Verlag (2015). ISBN: 978-3-8440-3351-9

[78] Philipp Tursch, Ralf Woll, Philipp Temminghoff and Stefan Bracke:
Beitrag zur Einbindung von Online-Communities zur Gewinnung von Zuverlässigkeitsdaten und Detektion von Feld-Schadensschwerpunkten in der Produktnutzungsphase.
In: Berichte zum Qualitätsmanagement (Hrsg.: S. Bracke, M. Mamrot und P. Winzer), Gesellschaft für Qualitätswissenschaft e.V., Band 13, Seite: 243–258, Shaker Verlag (2015). ISBN: 978-3-8440-3351-9

[77] Marcin Hinz, Andreas Lücker, Georg Knübel and Stefan Bracke:
Reliability Analysis Of Organic Fibres Based On Small Data Volumes.
(Reliability Analysis Of Organic Fibres Using Limited Data.)
Proceedings: RAMS 2015 - 61th Reliability and Maintainability Symposium, Palm Harbor, Florida, U.S.A. (2015).
ISBN: 978-1-4799-6703-2; doi: 10.1109/RAMS.2015.7105146

[76] Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue:
Upgradable Design for Reduction of Production Cost and CO₂ Emission - Case Study of a Laptop Computer.
3rd International Conference on Design and Concurrent Engineering (iDECON 2014), Malaysia, Melaka, 22nd – 23rd September 2014; (2014).
In: Applied Mechanics and Materials; Vol. 761, Pages: 589–593, (2015, May).
DOI: 10.4028/www.scientific.net/AMM.761.589

[75] Shuho Yamada, Tetsuo Yamada, Katsuyuki Nakano, Stefan Bracke, and Masato Inoue:
An environmental conscious product design method for sustainability of
product´s value.
Proceedings: Going Green – CARE INNOVATION 2014, November 17th – 20th, 2014, Schönbrunn, Vienna, Austria (2014).

[74] Stefan Bracke and Bianca Backes:
Risk analysis and minimization within high-precision dental tool manufacturing: multidimensional failure probabilities and validation.
Proceedings CIE44 & IMSS’14, 14th – 16th October 2014, Istanbul, Turkey (2014).

[73] Masato Inoue, Shuho Yamada, Tetsuo Yamada and Stefan Bracke:
An Upgradable Product Design Method for Improving Performance, CO2 Savings, and Production Cost Reduction:
Vacuum Cleaner Case Study.
International Journal of Supply Chain Management (IJSCM), ISSN: 2050-7399 (Online), 2051-3771 (Print), Exceling Tech Pub, Vol. 3, No. 4, Pages: 100–106, UK (2014).

[72] Stefan Bracke and Sebastian Sochacki:
Die Risiko-Analytik und -Prognose bei Produktflotten im Feld.
Die Methode „Risk Analysis and Prognosis of complex Products (RAPP)“ zur Berechnung von Produktflottenrisiken.
In: Industrie Management, GITO Verlag, Ausgabe 30, Seite: 27–31 (2014).

[71] Andreas Lücker, Marcin Hinz, Georg Knübel and Stefan Bracke:
Reliability analysis of prototypes based on small and heterogeneous test data volumes. Case study: Organic fibre prototype analysis.
In: T. Nowakowski, M. Mlynczak, A. Jodejko-Pietruczuk, S. Werbinska-Wojciechowska; Safety and Reliability – Methodology and Applications. ESREL 2014, Wroclaw, Poland, 14th – 18th September 2014; European Safety and Reliability Association, Pages: 1849–1856 (1885–1892?), doi: 10.1201/b17399-256, (2014).

[70] Stefan Bracke and Michael Pospiech:
Risk analytics within high-precision dental tool manufacturing: Multidimensional failure probabilities and validation.
In: T. Nowakowski, M. Mlynczak, A. Jodejko-Pietruczuk, S. Werbinska-Wojciechowska; Safety and Reliability – Methodology and Applications. ESREL 2014, Wroclaw, Poland, 14th – 18th September 2014; European Safety and Reliability Association, Pages: 2387–2394, doi: 10.1201/b17399-327, (2014).

[69] Stefan Bracke and Sebastian Sochacki:
RAPP method: Failure analysis and risk determination in automobile fleets within the case study electric actuator.
In: T. Nowakowski, M. Mlynczak, A. Jodejko-Pietruczuk, S. Werbinska-Wojciechowska; Safety and Reliability – Methodology and Applications. ESREL 2014, Wroclaw, Poland, 14th – 18th September 2014; European Safety and Reliability Association, Pages: 1573–1580, doi: 10.1201/b17399-214 (falsch), (2014).

[68] Thomas Köttermann, Matthias Grabert, Steffen Kempe and Stefan Bracke:
Bivariate reliability analyses of driving profiles in automobile fleets.
In: T. Nowakowski, M. Mlynczak, A. Jodejko-Pietruczuk, S. Werbinska-Wojciechowska; Safety and Reliability – Methodology and Applications. ESREL 2014, Wroclaw, Poland, 14th – 18th September 2014; European Safety and Reliability Association, Pages: 327–334, doi: 10.1201/b17399-214 (falsch), (2014).

[67] Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue:
An Upgrade Product Design Method for Satisfying Performance Criteria, Environmental Load and Cost.
Proceedings: The 3rd International Conference on Design Engineering and Science, ICDES 2014 Pilsen, Czech Republic, September 1st – 3rd, (2014). Pages: 174–179

[66] Masato Inoue, Shuho Yamada, Tetsuo Yamada and Stefan Bracke:
Upgradable Design for Various User Demands.
International Conference on Product Lifecycle Management (PLM 14), Japan, Yokohama, 7th – 9th July 2014; (2014).

[65] Marcin Hinz, Philipp Temminghoff and Stefan Bracke:
APTA approach: Analysis of accelerated prototype test data based on small data volumes within a car door system case study.
Proceedings: The 12th Probabilistic Safety Assessment and Management, PSAM 12, Honolulu, Hawaii, USA, June 22nd – 27th, 2014 (2014).

[64] Stefan Bracke and Sebastian Sochacki:
RAPP: Method for risk prognosis on complex failure behaviour in automobile fleets within the use phase.
Proceedings: The 12th Probabilistic Safety Assessment and Management, PSAM 12, Honolulu, Hawaii, USA, June 22th – 27th, 2014 (2014).

[63] Stefan Bracke, Masato Inoue, Berna Ulutas and Tetsuo Yamada:
CDMF-RELSUS concept: Reliable and Sustainable products -
Influences on design, manufaturing, layout integration and use phase.
Proceedings: 21st CIRP Conference on Life Cycle Engineering, (CIRP LCE)
Trondheim, Norway, June 18th – 20th, 2014 (2014). Pages: 8–13;
doi: 10.1016/j.procir.2014.06.083

[62] Marcin Hinz, Philipp Temminghoff and Stefan Bracke:
Beitrag zur multivariaten Analyse von Qualitäts- und Zuverlässigkeitsdaten in der Produkt-Erprobungsphase am Beispiel der Fahrzeugtechnik.
In: Berichte zum Qualitätsmanagement (Hrsg.: S. Gröger, T. Eiselt und J. Schuldt), Gesellschaft für Qualitätswissenschaft e.V., Band 12, Seite: 93–113, Shaker Verlag (2014).

[61] Stefan Bracke, Jens Michalski, Masato Inoue and Tetsuo Yamada:
CDMF-RELSUS concept: Reliable products are sustainable products –
influences on product design, manufacturing and use phase.
In: International Journal of Sustainable Manufacturing (Ed: I. S. Jawahir); Vol. 3, No. 1, Pages: 57–73), (2013). DOI: 10.1504/IJSM.2013.058634

[60] Jens Michalski, Tetsuo Yamada, Masato Inoue and Stefan Bracke:
CDMF-RELSUS concept: Reliable products are sustainable products – Automotive Case study “Clutch”.
Proceedings: 11th Global Conference on Sustainable Manufacturing: Innovative Solutions (Ed.: G. Seliger); Technische Universität Berlin, Berlin, Deutschland,
September 23rd – 25th, 2013 (2013). Pages: 220–223

[59] Stefan Bracke, Jens Michalski and Michael Pospiech:
Multivariate manufacturing process validation:
Risk minimisation within high-precision dental tool manufacturing
In: R.D.J.M. Steenbergen, P.H.A.J.M. van Gelder, S. Miraglia,
A.C.W.M. Vrouwenvelder: Safety, Reliability and Risk Analysis: Beyond the Horizon. ESREL 2013, Amsterdam, Netherlands, September 29th – October 2^nd, 2013; European Safety and Reliability Association – ESRA, Pages: 2307–2312 (2013). doi: 10.1201/b15938-345

[58] Stefan Bracke:
RAPP: A new approach for risk prognosis on technical complex products in automotive engineering.
In: R.D.J.M. Steenbergen, P.H.A.J.M. van Gelder, S. Miraglia,
A.C.W.M. Vrouwenvelder: Safety, Reliability and Risk Analysis: Beyond the Horizon. ESREL 2013, Amsterdam, Netherlands, September 29th – October 2nd, 2013; European Safety and Reliability Association - ESRA, Pages: 1333–1338, doi: 10.1201/b15938-199, (2013).

[57] Sebastian Persin, Stephan Haller and Stefan Bracke:
Konzept IDREMA zur Identifikation eines optimalen Referenzmarktes zur Steuerung der Schadteilrückführung.
26. Fachtagung Technische Zuverlässigkeit 2013,
Leonberg, 23. – 24.04.2013; Veranstalter: Verein Deutscher Ingenieure,
In: VDI Berichte 2210, Seite: 235–246 (2013).

[56] Stefan Bracke, Jens Michalski, Matthias Grabert and Johann-Friedrich Luy:
Beitrag zur mehrdimensionale Risiko- und Zuverlässigkeitsanalyse bei komplexen Schadenskausalitäten am Beispiel der Fahrzeugtechnik.
26. Fachtagung Technische Zuverlässigkeit 2013,
Leonberg, 23. – 24.04.2013; Veranstalter: Verein Deutscher Ingenieure,
In: VDI Berichte 2210, Seite: 191–204 (2013).

[55] Stefan Bracke, Jens Michalski and Michael Pospiech:
Risiko- und Feldschadensfallprognosen auf Gesamtproduktebene unter Verwendung von Isochronendiagramm-Analysen.
In: Berichte zum Qualitätsmanagement (Hrsg.: R. Jochem, D. Rößle), Berlin, Deutschland, 26. – 27. Februar 2013, Gesellschaft für Qualitätswissenschaft e.V., Band 14, Seite: 221–243, Shaker Verlag (2013).

[54] Sebastian Persin, Stephan Haller, Christina Wurz and Stefan Bracke:
IDREMA-Process: Identification of Reference Market for Defect Parts Routing.
Proceedings: RAMS 2013 - Annual Reliability and Maintainability Symposium, Orlando, Florida, U.S.A., January 28th – 31th, 2013 (2013).
IEEE Reliability Society, doi: 10.1109/RAMS.2013.6517632

[53] Stefan Bracke and Stephan Haller:
Field Damage Analysis (FDA) Concept:
Product Quality Improvement based on Field Data Analytics.
Proceedings: 2nd International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca, Romania, November 22nd – 24th, 2012, “Quality-Access to Success” Journal. Vol. 13, Page: 5, November 2012 (2012).

[52] Stefan Bracke, Jens Michalski, Masato Inoue and Tetsuo Yamada:
CDMF-RELSUS concept: Reliable products are sustainable products - Influences on product design, manufacturing and use phase.
Proceedings: 10th Global Conference on Sustainable Manufacturing: Towards Implementing Sustainable Manufacturing; Middle East Technical University, Istanbul, Turkey, October 31th – November 2th, 2012 (2012).

[51] Stefan Bracke and Stephan Haller:
Field data analysis with reduced sample sizes: The case study electro-mechanical actuator using optimised multi-stage sampling procedures.
Proceedings: ISRERM 2012 – International Symposium on Reliability Engineering and Risk Management, Yokohama, Japan, August 5th – 8th 2012,
Central South University Press (2012).

[50] Stefan Bracke and Sebastian Persin:
Schadteilesteuerung in komplexen Wertschöpfungsnetzwerken der Automobilindustrie: Feldstichprobenanalytik unter Kosten-, Repräsentativitäts- und Teileumfangaspekten.
In: Berichte zum Qualitätsmanagement (Hrsg.: R. Woll, M. Uhlemann), Cottbus, Deutschland, 28. – 29. Februar 2012, Gesellschaft für Qualitätswissenschaft e.V., Band 13, Seite: 103–127, Shaker Verlag (2012).

[49] Stefan Bracke, Stephan Haller and Michael Pospiech:
Risikoanalytik und Feld-Schadensfallprognosen auf Basis kleiner Datenmengen: Fallstudie „Risikoanalyse Fahrzeug-Steuergerät“.
In: Berichte zum Qualitätsmanagement (Hrsg.: R. Woll, M. Uhlemann), Cottbus, Deutschland, 28. – 29. Februar 2012, Gesellschaft für Qualitätswissenschaft e.V.,
Band 13, Seite: 77–101, Shaker Verlag (2012).

[48] Stefan Bracke, Stephan Haller and Michael Pospiech:
Damage case prediction during the product´s development process and life cycle: Evaluation of prediction methods within case studies.
Proceedings: PSAM 12 & ESREL 2012 – 11th International Probabilistic Safety Assessment and Management Conference & The Annual European Safety and Reliability Conference, Helsinki, Finland, June 25th – 29th, 2012;
European Safety and Reliability Association - ESRA (2012).
Curran Associates, Inc.

[47] Stefan Bracke and Stephan Haller:
Field data analysis with reduced sample sizes: The ECU case study using the
optimised multi-stage sampling procedures (OMSP) concept.
Proceedings: PSAM 12 & ESREL 2012 – 11th International Probabilistic Safety Assessment and Management Conference & The Annual European Safety and Reliability Conference, Helsinki, Finland, June 25th – 29th, 2012;
European Safety and Reliability Association - ESRA (2012).
Curran Associates, Inc.

[46] Stefan Bracke and Stephan Haller:
OMSP: Failure detection based on small field part and data volumes.
Proceedings: RAMS 2012 – Annual Reliability and Maintainability Symposium, Reno, Nevada, U.S.A., January 23rd – 26th, 2012 (2012).
IEEE Reliability Society. ISBN: 978-1-4577-1851-9;
doi: 10.1109/RAMS.2012.6175514

[45] Stefan Bracke and Stephan Haller:
Early identification of manufacturing process influences on product failure behaviour based on small field data volume.
4th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2011), Montreal, 2nd - 5th October, Canada 2011.
In: Enabling Manufacturing Competitiveness and Economic Susbinability,
(Hrsg.: H. El Maraghy), CIRP, Springer Verlag (2012). Pages: 322–327;
ISBN: 978-3-642-23859-8; doi: 10.1007/978-3-642-23860-4_53

[44] Stefan Bracke and Stephan Haller:
Frühzeitige Risiko- und Zuverlässigkeitsanalyse von Garantiedaten am Beispiel der Automobilindustrie.
Proceedings: 25. Fachtagung Technische Zuverlässigkeit,
Leonberg, 11.-12.05.2011; Veranstalter: Verein Deutscher Ingenieure,
In: VDI Berichte 2146, ISBN 978-3-18-092146-4, Seite: 317–330 (2011).

[43] Stefan Bracke and Stephan Haller:
The RAW concept: Early identification and analysis of product failure behaviour in the use phase.
In: C. Berenguer, A. Grall und C. G. Soares: Advances in Safety, Reliability and Risk Management. Taylor & Francis Group, London. Proceedings: ESREL 2011 – European Safety and Reliability Conference, Troyes, France, September 22nd – 28th, Page: 240 (Pages: 1508–1514?) , 2011; European Safety and Reliability Association - ESRA (2011). ISBN: 978-0-415-68379-1; doi: 10.1201/b11433-213

[42] Stefan Bracke and Ralf Breede:
Analyse komplexer Verschleißmechanismen mit dem DPP-Konzept.
- Wann ist der Lack ab? -.
Zeitschriftenaufsatz: Qualität und Zuverlässigkeit (QZ), Carl Hanser Verlag,
56. Jahrgang, Heft 8, Seite: 54–55 (2011).

[41] Stefan Bracke and Stephan Haller:
Advanced Reliability Analysis of Warranty Databases (RAW)
Konzept: Beitrag zur frühzeitigen Zuverlässigkeitsanalyse im Wertschöpfungsnetzwerk am Beispiel der Fahrzeugtechnik.
In: Berichte zum Qualitätsmanagement (Hrsg.: B. Petersen und V. Raab),
Gesellschaft für Qualitätswissenschaft e.V., Band 12, Seite: 97–121,
Shaker Verlag (2011).

[40] Stefan Bracke and Ralf Breede:
Integration von roboterbasierten Produkttests und statistischer Zuverlässigkeitsanalytik zur Abbildung komplexer Verschleißmechanismen in frühen Phasen der Fahrzeugentwicklung.
In: Berichte zum Qualitätsmanagement, (Hrsg.: B. Petersen und V. Raab), Gesellschaft für Qualitätswissenschaft e.V., Band 12, Seite: 171–190,
Shaker Verlag (2011).

[39] Stefan Bracke and Ralf Breede:
Design of Prototype test Procedures (DPP) concept: Application in the Automotive Case Study “surface damage door paint”.
Proceedings: XXIII. Deutsch-Polnisches Seminar; Recent Research Result in Automotive, Electrical & Information Technologies, 28. – 29.06.2011; Warsaw University of Technology, Poland (2011).

[38] Stefan Bracke and Stephan Haller:
Field damage analysis (FDA) concept: Contribution to the comprehensive reliability analysis of complex field damage causes.
Proceedings: RAMS 2011 – Annual Reliability and Maintainability Symposium, Florida, U.S.A., January 24th – 27th, 2011 (2011). ISBN: 978-1-4244-8857-5;
doi: 10.1109/RAMS.2011.5754482

[37] Stefan Bracke and Stephan Haller:
Advanced Reliability Analysis of Warranty Databases (RAW)’ Concept: Support Sustainable Products and Manufacturing
Proceedings: 8th Global Conference on Sustainable Manufacturing; Architecture for Sustainable Engineering – The UAE Case,
November 22th – 24th, 2010, Abu Dhabi University Khalifa City Campus,
Abu Dhabi, United Arabic Emirates (2010).
In: Advances in Sustainable Manufacturing
(Hrsg.: G. Seliger, M. Khraisheh, I. Jawahir), CIRP, Springer Verlag (2010).
Pages: 165–170; ISBN: 978-3-642-20183-7; doi: 10.1007/978-3-642-20183-7_24

[36] Stefan Bracke and Stephan Haller:
‘Optimised Multi-Stage Sampling Procedures (OMSP)’ concept,
contribution to the field-data-analysis of complex damage causes.
In: B. Ale, I. Papazoglou, E. Zio: Reliability, Risk and Safety: Back to the Future. Taylor & Francis Group, London. Proceedings: ESREL 2010 – European Safety and Reliability Conference, Rhodos, Greece, September 5th – 9th, 2010;
European Safety and Reliability Association - ESRA (2010).
CRC Press Taylor & Francis Group an Informa business. ISBN: 9780415604277

[35] Stefan Bracke, Roderich Rose and Ralf Breede:
Design of Prototype test Procedures (DPP concept) for complex damage causes in automotive engineering.
In: B. Ale, I. Papazoglou, E. Zio: Reliability, Risk and Safety: Back to the Future. Taylor & Francis Group, London. Proceedings: ESREL 2010 – European Safety and Reliability Conference, Rhodos, Greece, September 5th – 9th, 2010;
European Safety and Reliability Association - ESRA (2010).

[34] Stefan Bracke and Roderich Rose:
Zeit ist Geld – auch im Feld: Parameterfreie Testverfahren in der Risikoanalytik.
Zeitschriftenaufsatz: Qualität und Zuverlässigkeit (QZ), Carl Hanser Verlag,
55. Jahrgang (2010), Heft 7, Seite: 54–55 (2010).

[33] Stefan Bracke and Stephan Haller:
‘Optimised Multi-Stage Sampling Procedures (OMSP)’ concept,
contribution to the technical field failure case analysis.
Proceedings: XXII. Deutsch-Polnisches Seminar; Development Trends in Design of Machines and Vehicles, Warschau, 14./19.06.2010;
Warsaw University of Technology, Poland (2010).

[32] Stefan Bracke and Stephan Haller:
Multi-Stage sampling process and analysis (MSPA) – Beitrag zur Felddaten-Analytik bei komplexen Schadenskausalitäten.
In: Berichte zum Qualitätsmanagement (Hrsg.: R. Schmitt),
Gesellschaft für Qualitätswissenschaft e.V., Band 12, Seite: 31–47,
Shaker Verlag (2010).

[31] Stefan Bracke and Stephan Haller:
Einsatz von nichtparametrischen statistischen Methoden in der Risiko- und Zuverlässigkeitsanalytik.
Einzelbericht im Forschungsbericht der Fachhochschule Köln 2009,
Seite: 52–55, Hrsg.: Fachhochschule Köln (2010).

[30] Stefan Bracke and Stephan Haller:
The “field damage analysis” (FDA) – process for supporting the development of environmental-friendly products.
Proceedings: 7th Global Conference on Sustainable Manufacturing; Sustainable Product Development and LifeCycle Engineering; December 2nd–4th, 2009, Indian Institute Technology Madras, Indian (2009).

[29] Stefan Bracke and Stephan Haller:
Parameterfreie Statistik in der Risiko- und Zuverlässigkeitsanalytik – Beitrag zur ressourcenschonenden Produktentwicklung am Beispiel Fahrzeugtechnik.
Einzelbericht im Tagungsband der Kompetenzplattform STEPS Wissenschaftliches Kolloquium 05. November 2009, Seite: 60–69,
Hrsg.: Fachhochschule Köln (2009).

[28] Stefan Bracke and Stephan Haller:
Analysing multiple damage causes of complex products using DCD algorithm and WCF approach.
In: Bris, R., Guedes Soares, C., Martorell, S., Reliability, Risk and Safety: Theory and Applications, Taylor & Francis Group, London. Proceedings: ESREL 2009 – European Safety and Reliability
Conference, Prag, September 7th – 10th, 2009; European Safety and Reliability Association – ESRA (2009). Pages: 819–826, ISBN: 978-0-415-55509-8;
doi: 10.1201/9780203859759.ch111

[27] Stefan Bracke:
Beitrag zur Risikoanalytik in der Fahrzeugtechnik unter Einsatz von empirischen Fahrzeuglaufleistungsprofilen und Mischpopulationsansätzen (WCF-Approach).
Einzelbericht im Forschungsbericht der Fachhochschule Köln 2008,
Seite: 48–52, Hrsg.: Fachhochschule Köln (2009).

[26] Stefan Bracke and Stephan Haller:
Prävention durch Präzision.
Statistik des komplexen Ausfallverhaltens technischer Bauteile.
Zeitschriftenaufsatz: Qualität und Zuverlässigkeit (QZ), Carl Hanser Verlag,
54. Jahrgang, Heft 7, ISSN 0720-1214, Seite: 48–49 (2009).

[25] Stefan Bracke and Stephan Haller:
Contribution for sustainable design of complex automotive products using weighted combined functions (WCF-Approach) within carry over part strategies.
Proceedings: XXI. Deutsch-Polnisches Seminar; Engineering for Change,
Köln, 16./17.06.2009; Fachhochschule Köln,
Universität Warschau (2009).

[24] Stefan Bracke and Stephan Haller:
Statistische Methoden zur Differenzierung komplexer Schadenskausalitäten innerhalb des Ausfallverhaltens komplexer Baugruppen.
Proceedings: 24. Fachtagung Technische Zuverlässigkeit,
Leonberg, 29./30.04.2009; Veranstalter: Verein Deutscher Ingenieure,
In: VDI Berichte 2065, ISBN 978-3-18-092065-8, Seite: 79–88 (2009).

[23] Stefan Bracke and Stephan Haller:
Beitrag zur ganzheitlichen statistischen Beschreibung des Ausfallverhaltens von Baugruppen und –systemen innerhalb eines Lebenszyklus am Beispiel der Fahrzeugtechnik.
Proceedings: 24. Fachtagung Technische Zuverlässigkeit,
Leonberg, 29./30.04.2009; Veranstalter: Verein Deutscher Ingenieure,
In: VDI Berichte 2065, ISBN 978-3-18-092065-8, Seite: 277–284 (2009).

[22] Stefan Bracke and Stephan Haller:
Beitrag zur lebenszyklusorientierten Bewertung von Produktqualität und
-zuverlässigkeit auf Basis eines Wertschöpfungsnetzwerkes.
In: Berichte zum Qualitätsmanagement (Hrsg.: L. Theuvsen und M. Deimel),
Gesellschaft für Qualitätswissenschaft e.V., Band 11, Seite: 33–49,
Shaker Verlag (2009).

[21] Stefan Bracke and Stephan Haller:
Risikoanalytik in der Fahrzeugtechnik unter Einsatz von empirischen Fahrzeuglaufleistungsprofilen und Mischpopulationsansätzen (WCF-Approach).
Einzelbericht im Forschungsbericht der Fachhochschule Köln 2008,
Seite: 48–52, Hrsg.: Fachhochschule Köln (2008).

[20] Stefan Bracke and Stephan Haller:
Defekt – aber warum? Softwarealgorithmus analysiert komplexe Schadenssymptome.
Zeitschriftenaufsatz: Qualität und Zuverlässigkeit (QZ), Carl Hanser Verlag,
53. Jahrgang, Heft 11, ISSN 0720-1214, Seite: 96–97 (2008).

[19] Stefan Bracke:
A contribution for a sustainable design of complex mechatronic automotive products using statistical damage prediction models in the early product construction phase to prevent damage causes.
Proceedings: Sustainability and Remanufacturing (VI),
Global Conference on Sustainable Product Development and Life Cycle Engineering, Pusan National University, September 29th – October 1st, 2008,
Pusan, Korea (2008).

[18] Stefan Bracke:
Grundlagen der Bauteilkennzeichnung zur Absicherung der Bauteil-Fertigung sowie Sicherstellung der Bauteil-Rückverfolgbarkeit im Feld.
Konzernnorm PN 109-2 der Dr. Ing. h.c. F. Porsche AG,
Dr. Ing. h.c. F. Porsche AG – Eigenverlag, 9 Seiten (2006).

[17] Stefan Bracke:
Nachweis der Prüfprozesseignung und der Prüfmittelfähigkeit.
Konzernnorm PN 243 der Dr. Ing. h.c. F. Porsche AG,
Dr. Ing. h.c. F. Porsche AG - Eigenverlag, 9 Seiten (2003).

[16] Stefan Bracke:
Statistische Prozesslenkung (SPC) - Grundlagen.
Konzernnorm PN 242 der Dr. Ing. h.c. F. Porsche AG,
Dr. Ing. h.c. F. Porsche AG - Eigenverlag, 6 Seiten (2002).

[15] Stefan Bracke and J. Gottschalk:
Qualitätsrangzahl – Bewertung von bereichsübergreifenden Problemen.
Konzernnorm PN 21001 der Dr. Ing. h.c. F. Porsche AG,
Dr. Ing. h.c. F. Porsche AG - Eigenverlag, 15 Seiten (2001).

[14] Stefan Bracke:
Qualitätssicherungsstrategien für die Wiederverwendung von Baueinheiten aus komplexen technischen Investitionsgütern innerhalb eines Produktrecyclings.
Fachbuch, Reihe: Berichte aus dem Maschinenbau (zugl. Dissertation Ruhr-Universität Bochum), Shaker Verlag, ISBN 3-8265-6503-7, 197 Seiten (1999).

[13] Stefan Bracke and Herbert Schnauber:
Produktrecycling bei Investitionsgütern des Maschinenbaus.
Zeitschriftenaufsatz: Entsorgungspraxis, Friedr. Vieweg & Sohn
Verlagsges. mbH,
17. Jahrgang, Heft 4, ISSN 0724-6870, Seite: 19–21 (1999).

[12] Stefan Bracke, Joachim Bathe, Thomas Bönker, T. Fetting, P. Hesse and B. G. Pfeiffer:
Leitfaden für die kreislaufgerechte Konstruktion - Produktgruppe Pumpen
und Verdichter.
Fachbuch, Eigenverlag, ISBN 3-00-003936-8, 40 Seiten (1999).

[11] Joachim Bathe, Stefan Bracke, Thomas Bönker, B. G. Pfeiffer and M. Weise:
Modulares System zur Kreislaufführung komplexer technischer Gebrauchsgüter – Produktgruppe Pumpen und Verdichter.
Abschlußbericht des Forschungs-Verbundprojektes KOMTEG,
Hrsg.: Forschungszentrum Karlsruhe (FZK) GmbH, Wissenschaftliche Berichte FZKA-PFT 195, ISSN 0948-1427, 147 Seiten (1999).

[10] Stefan Bracke, Herbert Schnauber and Joachim Bathe:
Für ein zweites Leben. Prüfplanung in der Austauschfertigung.
Zeitschriftenaufsatz: Qualität und Zuverlässigkeit (QZ), Carl Hanser Verlag,
43. Jahrgang, Heft 10, ISSN 0720-1214, Seite: 1241–1245 (1998).

[9] Stefan Bracke and Herbert Schnauber:
Der integrative Ansatz zur Durchführung eines erfolgreichen Produktrecyclings.
Zeitschriftenaufsatz: Output - Zeitschrift des Technologiezentrums Ruhr (TZR) und des Zentrums für Entsorgungstechnik und Kreislaufwirtschaft (ZEK),
Hrsg.: Cooperationsgesellschaft Hochschulen und industrielle Praxis GmbH,
Ausgabe 2/98 “Neue Wege in der Kreislaufwirtschaft”, Seite: 10–11 (1998).

[8] Stefan Bracke and O. Reim:
Gestaltung und Integration einer Sekundärproduktion in produzierende Unternehmen.
Einzelbericht in: Eine integrative Kraft der Bochumer Arbeitswissenschaft,
Seite: 115–128; Hrsg.: C. Treier, J. Zülch,
Reihe: Innovative Arbeitswissenschaft, Bd. 8; Hrsg.: H. Schnauber,
Universitätsverlag Dr. N. Brockmeyer, ISBN 3-8196-0555-X (1998).

[7] Stefan Bracke and Herbert Schnauber:
Die Integration der “Wiederverwendung von Bauelementen” innerhalb von produzierenden Unternehmen zur Schließung von Kreisläufen auf höchstmöglichem Wertniveau.
Proceedings: Tagungsband zum 2. Internationalen Symposium “Produzieren in der Kreislaufwirtschaft”, CCD-Congress Center (1./2.10.1997),
Hrsg.: Fraunhofer-Institut für Chemische Technologie (ICT), 9 Seiten (1997).

[6] Stefan Bracke and Thomas Bönker:
Wirtschaften in Kreisläufen - Modulare Lösungen für komplexe Gebrauchsgüter.
Zeitschriftenaufsatz: VDI Umwelt, Springer-VDI-Verlag,
Band 27, Heft 9/10, ISSN 0041-6355, Seite: 50–54 (1997).

[5] Stefan Bracke and Herbert Schnauber:
Nicht nur einmal im Leben.
Recyclingkonzepte für Pumpen aus dem Investitionsgüterbereich.
Zeitschriftenaufsatz: Chemie Technik, Hüthig Fachverlage,
26. Jahrgang, Heft 8, ISSN 0340-9961, Seite: 62–64 (1997).

[4] Stefan Bracke and Thomas Bönker:
Recyclingkonzepte für Pumpen und Verdichter jetzt gezielt angehen.
Zeitschriftenaufsatz: Chemische Rundschau, Vogt-Schild AG (Schweiz),
50. Jahrgang, Ausgabe 3, ISSN 0009-2983, Seite: 10 (1997).

[3] Stefan Bracke and Thomas Bönker:
KOMTEG - Ansatz zur Kreislaufführung. Modulares System zur Kreislaufführung komplexer technischer Gebrauchsgüter.
Zeitschriftenaufsatz: Baustoff Recycling + Deponietechnik, Stein-Verlag GmbH,
13. Jahrgang, Heft 2, ISSN 0934-683, Seite: 26–27 (1997).

[2] Stefan Bracke:
Modulares System zur Kreislaufführung komplexer technischer Gebrauchsgüter
- Produktgruppe Pumpen und Verdichter -.
Proceedings: Tagungsband zum Kolloquium zur Kreislaufwirtschaft und Demontage des DFG-Sonderforschungsbereiches 281 „Demontagefabriken zur Rückgewinnung von Ressourcen in Produkt- und Materialkreisläufen“,
Berlin / Technische Universität Berlin (30./31.01.1997), Seite: 220–223;
Hrsg.: Institut für Werkzeugmaschinen und Fabrikbetrieb; TU Berlin (1997).

[1] Stefan Bracke and Thomas Bönker:
Optimierung der Kreislaufführung.
Zeitschriftenaufsatz: Metall, Hüthig Fachverlage,
50. Jahrgang, Heft 12, ISSN 0026-0746, Seite: 826–827 (1996).

Normal 0 21 false false false DE X-NONE X-NONE Normal 0 false 21 false false false DE X-NONE X-NONE